Refurbished Carver Chair

I thought I would start this blog with the finish today....just for something different. At least the finished chair all wrapped up, as it was last weekend, as an engagement present for a lovely young couple I know who are soon to be married.

 I had always thought this chair was special. I bought it at a community fundraising auction in a little country town. The picture below shows exactly what it looked like, except perhaps it was a little dirtier. I knew I wanted to try and fix it, although at the time I had no idea what to do with that big gaping hole where the seat should have been.

 The first step involved sanding back, not too hard a job this time given it was already pretty much in a raw state. I chose to paint it with Blake & Taylor furniture paint. My young engaged couple chose their own colours...although they had no idea they were doing so at the time. A lovely combination of Old White and French Linen.

 I used two coats of each paint colour on the chair, no need to prime with this easy to apply paint. I then rubbed it all over with a piece of steel wool, a little harder in spots to lightly distress, and then finished off with a natural beeswax finish.

 Here it is all ready for the upholstery work, which for the first time required me to use webbing.

 I used elastic webbing for the seat as the lovely salesperson at the upholstery supply shop told me I should...good enough reason for me...well actually she said it was much stronger than the jute version which is normally used for the backs of chairs now. Simply a matter of stretching the webbing one piece at a time and then weaving over and under in a criss cross pattern. All pretty easy...with the right tool! Which is this, a web stretcher.

That rubbery piece at the top rests against the chair while the sharp piece at the end pulls the web tight., so you can tack it into place. This little baby didn't come cheap. I paid over $40 AU for it two years ago, but if you are planning on doing a few of these jobs then it's an absolute must. I couldn't have done without it!

Once the webbing was in place, a covering of hessian (burlap) is tacked into place. This is how it looks underneath. I love seeing things come together!

Once the hessian was completed, the steps are exactly the same as the window seat / storage box that I completed a few months ago, you can follow the directions here But in a nutshell, it involves, foam, Dacron, calico and then fabric.

Tacking around the back corners of the chair was tricky...I would imagine it gets easier with practise, but also the right tools again. I ran out of tacks and sent my hubby off to buy some more. He came back with more tacks and this..a proper upholstery tool. I love him! So much easier!

Final steps involve attaching the trim with a hot glue gun and attaching the bottom cloth.

And here it is the finished product.

 Did you notice the beautiful upholstery linen on the chair? It is the lovely Bohemian Blooms from the very talented designer Thea Samios of Thea and Sami 

I had some left over from a previous project.

and the Before and After...always such fun!

I hope you like it! Lisa xx

Upholstered Chair

For as long as I can remember I have had a fascination with chairs and a desire to learn upholstery. Over the years I have collected an assortment of chairs that I would love to refinish. When I went to the library I invariably borrowed books on how to upholster, I looked into classes teaching upholstery but found the prices prohibitive and so finally thought that I would 'have a go' and teach myself.

 I found this lovely chair about a year ago at auction and thought it would be perfect to one day finish. It came home and went into the shed, along with six or so others that had similar potential. This week I pulled it out.

 I loved the detail on the ladder back and the front legs.

I removed the seat which was a piece of covered solid plywood screwed on in four places...pretty easy! Then it received a quick sand down with the mouse sander and by hand around the curvy bits.

I then brought it inside, to avoid the non-stop heavy winter rain we've been having and started the paint job. Because I used Blake & Taylor furniture paint I didn't need to prime. This paint is so easy to apply. I chose French Blue as the colour, and it does have a very nice French provincial look to it. Do you know you always start on the back of a chair first when you paint it? It makes the job easier.

 First coat done...it's always hard to get a photo showing the right colour inside a building, 

trust me it's French blue.

 I completed the second coat a few hours later and when it was dry I wiped it all over lightly with a piece of steel wool, dusted it off and then finished it off with a coat of natural beeswax.

 NEXT CAME THE NEW ADVENTURE!

I had borrowed this book from the Tasmanian State Library. I love this library and consider it one of the best things about living in Tasmania (but maybe that's a post for another time!)

The book was very helpful...and gave me the confidence to tackle the project myself.

I removed the top covering of the seating. I think it was some sort of vinyl. After removing the tacks and lifting the vinyl I found a very thin piece of foam which I discarded and a thin piece of rubber in good condition. Being a 'make do' sort of a person I decided to keep and reuse the rubber.

I had previously bought a piece of seating foam cut to size and some Dacron fibrefill which I bought by the metre. I used some spray adhesive to temporarily join them to each other and the plywood base with the rubber. I'd gotten so far but I didn't have any top fabric that matched my French blue chair and I was really trying to avoid buying anything new. The following morning at 3am I woke with a clear idea in my head of what I could use.

My family don't usually donate their denim to charity because I find that there is so much material that I can use for other projects like shopping bags etc. I remembered I had a few containers like this in the shed filled to the brim with old denim jeans. The idea formed to use the denim and I could hardly wait to get started when the clock reached a decent hour!

Because I had no piece of denim large enough to entirely cover the chair base, I chose to patchwork it together, this took about an hour and a half to complete.

The final steps included covering the foam and Dacron with a piece of calico (forgot to take a pic), to take the bulk of the strain from the upholstery tacks, then covering and tacking down the top denim cover with more tacks. I hammered them in part way at the centre of all four sides first, then worked my way around the cushion base using special care at the corners. When I was happy with how it looked, I drove all the tacks home.

The very final step was re-screwing the seat to the frame and attaching the bottom cloth to the underside of the chair...this stuff is quite cheap (around 85 cents a metre) but is so worth doing to give the chair that professional finish.

THE FINISHED RESULT!

The front...

...and the back! I have to say that the chair is now so comfortable! The Dacron over the foam really made a big difference and was not that expensive given the difference it made to the comfort and look of the seat.

So here it is... the Before and After. I am so excited to have done this and it is amazing how much confidence it has given me to keep going with some more upholstery projects. I hope you like it too. Lisa xx
P.S. This chair is for sale here.